Top 10 common forklift crashes ， forklift operation ought to pay attention to these issues ！.

Do not underestimate the forklift at work. If the operation is not good, there will certainly be significant mishaps in mins, and there are numerous crashes including forklifts.

Situation 1: The forklift freight blocked the motorist's sight, and the individual ahead could not be found, causing a moving crash.
Instance 2: In order to preserve the equilibrium of the forklift when lifting hefty products, the employees utilized their body weight as the counterweight, which virtually created casualties.
Instance 3: The width of the forklift cargo exceeds the permitted width of the path and holds on the roadside shelf, which almost triggers an crash.
Situation 4: Forklift is speeding and surrender throughout a turn.
Case 5: The forklift motorist did not discover the pedestrian, and the pedestrian did not discover the forklift.
Situation 6: The forklift raises the personnel unlawfully, the forklift driver does not put on the safety belt, the forklift lifter falls and the chauffeur is crushed when the forklift surrender.
Situation 7: The forklift driver did not put on a safety belt and fell from the vehicle when it surrendered and was crushed.
Forklift procedure must take notice of these matters ：.

Start.
1. Prior to starting, observe the environments, and after verifying that there are no obstacles that prevent the security of driving, beep the horn first and then begin.
2. For vehicles with hydraulic ( atmospheric pressure) brakes, the brake hydraulic pressure ( atmospheric pressure) gauge need to be safe before beginning.
3. When the forklift starts with a lots, the chauffeur ought to initially verify that the tons is steady and reliable.
4. The beginning has to be sluggish and consistent.

Driving.
1. When driving, the elevation between the bottom end of the fork and the ground should be maintained 300mm-400mm, and the mast must be slanted backwards. .
2. Do not lift the fork expensive when driving. When entering and leaving the job site or while driving, be careful that there will be no obstacles in the sky. When the load is taking a trip, the fork has to not be increased too high, which will impact the stability of the forklift. .
3. After discharging, the fork needs to be lowered to the normal driving placement before driving. .
4. When transforming, if there are pedestrians or vehicles close by, the driving signal must be provided first. High-speed sharp turns are restricted. High-speed doglegs will certainly cause the automobile to shed lateral security and tip over. .
5. When the forklift is downhill, it is strictly prohibited to switch off the fire and slide, and it is prohibited to brake instantly while driving with lots unless there are unique circumstances.
6. When the forklift is running, it needs to follow the traffic rules in the factory and need to keep a particular safety distance from the lorry ahead. .
7. When the forklift is running, the lots should remain in the most affordable placement that does not hinder the driving, and the gantry needs to be properly tilted back. The lots shall not be increased other than when stacking or loading. .
8. The elevation of the load must not obstruct the driver's sight. In unique scenarios, when the thing influences the forward vision, drive at a low speed when reversing.
9. It is prohibited to activate the ramp, neither to drive across the ramp. .
10. The safe driving speed of the forklift in the factory area is 5 km/h, and it must drive safely at a reduced speed when entering the manufacturing workshop area. .
11. When the forklift is raised, raised or driven, it is prohibited for personnel to base on the fork to hold things and play a stabilizing duty. .
12. If troubles are discovered, they will certainly be repaired and reported in a prompt manner, and they will never run with illnesses or hide them.

packing and unloading.
1. When fork-loading items, the range in between the two forks should be readjusted as needed to make the lots of the two forks balanced and not manipulated, and one side of the product ought to protest the shelf. .
2. It is prohibited to deal with a solitary fork or utilize a fork top or pull. In special situations, safety and security warning signs have to be established to remind surrounding pedestrians. .
3. In the process of packing and discharging things, the forklift must be stopped with the brake. .
4. The speed of the automobile ought to be slow-moving and constant. Be careful not to roll the wheels on the dunnage, so as not to stretch the rolled things and injure individuals. .
5. When utilizing a fork to fork the goods, the fork needs to be as deep as possible under the tons, and it must be noted that the fork pointer should not touch other products or objects. The lots ought to be supported with marginal back tilt of the gantry so that the load does not move backwards. The pole can be tilted ahead slightly when the lots is lowered to allow for simple placement of the load and extraction of the forks. .
6. Stand-on Electric Pallet Stacker It is forbidden to fork items at high speed and ram difficult things with the fork head. .
7. When the forklift is working, it is forbidden for individuals to loaf the fork, so as to prevent the collapse of the goods and injure people. .
8. Overwhelming is banned, and it is banned to utilize forks to lift employees to participate in high-altitude procedures to stay clear of high-altitude dropping mishaps. .
9. It is not enabled to utilize the Electric Forklift Truck for Warehouse brake inertia to slip, put, round or roll things. .
10. It is not allowed to use forks to select, turn pallet discharge.

Leaving .
1. It is prohibited to leave the forklift when the things on the fork are in the air. Prior to leaving the forklift, you must unload the goods or lower the fork frame.
2. Draw the emergency brake manage to dead or dispirit the parking brake button.
3. The engine is shut off and the power is cut off. (Except for unique scenarios, such as the driver does not leave the automobile's view and does not exceed 1 minute).
4. Remove the key. .

Forklift Operation Precautions.
1. Prior to and after the forklift operation, the look ought to be examined, and gas, lubricating oil and air conditioning water should be added.
2. Check the security efficiency of beginning, running and braking.
3. Examine whether the lights and horn signals are full and efficient.
4. Throughout the operation of the forklift, check whether the pressure and temperature are regular.
5. After the forklift is running, the outside leakage must additionally be examined and the seals must be replaced in time.

Forklift Safety Operation Specifications.
1. You must examine before leaving the car;.
2. When you run into somebody before you during driving, you must send a signal at a distance of 5 m;.
3. The driving speed in the factory does not surpass 5 km/h;.
4. When driving, the nadir of the freight should be 0.3 m ~ 0.4 m above the ground;.
5. The transforming need to not be as well sharp to stop the tendency of " totally free switching";.
6. Adding and down the slope ought to be slow and uniform, and no switching on the slope is enabled.
7. Do not drive throughout the gradient. When the slope is greater than 10%, the vehicle must be driven in reverse when declining;.
8. When the forklift workers lug the goods and progress, if they run into huge or heavy goods and go to the chauffeur's line of vision, they ought to take the reversing workout
.
The "Eight Prohibitions" need to be adhered to in the procedure.
1. Single fork procedure is not permitted.
2. It is not permitted to raise the goods for cross country driving.
3. It is not permitted to grab the goods by passing on the pallet with the fork.
4. It is not permitted to directly shovel chemicals, flammables and other dangerous chemicals with forks.
5. It is not allowed to make use of inertia force to get the goods.
6. It is not enabled to use stopping pressure to expatriation round or easy-to-roll objects.
7. It is not allowed to bring people to deal with the pallet or fork, and it is purely restricted to stand under the fork after the fork is increased.
8. Do not drive side to side on slopes
.
Car parking is not allowed under the following problems.
1. Contours, narrow roads, train crossings;.
2. Areas with a longitudinal slope higher than 5%.
3. When there is an obstacle on one side of the road, the opposite side of the area with the exact same size as the obstacle must be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844